dmesg - 2013-08-21 02:27
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-29-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #42-Ubuntu SMP Tue Aug 13 19:40:39 UTC 2013 (Ubuntu 3.8.0-29.42-generic 3.8.13.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ce479fff] usable
BIOS-e820: [mem 0x00000000ce47a000-0x00000000cea37fff] reserved
BIOS-e820: [mem 0x00000000cea38000-0x00000000cee34fff] ACPI NVS
BIOS-e820: [mem 0x00000000cee35000-0x00000000cf154fff] reserved
BIOS-e820: [mem 0x00000000cf155000-0x00000000cf155fff] usable
BIOS-e820: [mem 0x00000000cf156000-0x00000000cf35bfff] ACPI NVS
BIOS-e820: [mem 0x00000000cf35c000-0x00000000cf7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000082effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS FC 02/05/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x82f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-D3FFF write-protect
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CF800000 mask FFFFFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000082f000000 aka 33520M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3320MB, range: 8MB, type UC
total RAM covered: 3320M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3320MB, range: 8MB, type UC
e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8b0-0x000fd8bf] mapped at [ffff8800000fd8b0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xcf7fffff]
[mem 0x00000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcf7fffff] page 2M
kernel direct mapping tables up to 0xcf7fffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100001000-0x82effffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x7ffffffff] page 1G
[mem 0x800000000-0x82effffff] page 2M
kernel direct mapping tables up to 0x82effffff @ [mem 0xcf7fc000-0xcf7fffff]
RAMDISK: [mem 0x344ac000-0x3624dfff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000cee17078 0006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000cee1d820 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
ACPI: DSDT 00000000cee17178 066A3 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000cee2ff80 00040
ACPI: APIC 00000000cee1d918 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000cee1d9b8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000cee1da00 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000cee1da40 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: BGRT 00000000cee1da78 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000cee1dab0 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: MATS 00000000cee1f1c8 00034 (v02 ALASKA A M I 00000002 w?x2 00000000)
ACPI: IVRS 00000000cee1f200 000E0 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000082effffff]
Initmem setup node 0 [mem 0x00000000-0x82effffff]
NODE_DATA [mem 0x82effb000-0x82effffff]
[ffffea0000000000-ffffea0020bfffff] PMD -> [ffff88080e600000-ffff88082e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x82effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009bfff]
node 0: [mem 0x00100000-0xce479fff]
node 0: [mem 0xcf155000-0xcf155fff]
node 0: [mem 0xcf35c000-0xcf7fffff]
node 0: [mem 0x100001000-0x82effffff]
On node 0 totalpages: 8378538
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3910 pages, LIFO batch:0
DMA32 zone: 13157 pages used for memmap
DMA32 zone: 828858 pages, LIFO batch:31
Normal zone: 117696 pages used for memmap
Normal zone: 7414847 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000ce47a000 - 00000000cea38000
PM: Registered nosave memory: 00000000cea38000 - 00000000cee35000
PM: Registered nosave memory: 00000000cee35000 - 00000000cf155000
PM: Registered nosave memory: 00000000cf156000 - 00000000cf35c000
PM: Registered nosave memory: 00000000cf800000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0xcf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88082ec00000 s85056 r8192 d21440 u262144
pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8247615
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ f8000000 size 64 MB
Memory: 32876728k/34324480k available (7013k kernel code, 810328k absent, 637424k reserved, 6229k data, 996k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:1288 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4018.279 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8036.55 BogoMIPS (lpj=16073116)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00cf800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26712 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events:
perf: AMD core performance counters detected
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (64292.46 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcea38000-0xcee34fff] (4182016 bytes)
PM: Registering ACPI NVS region [mem 0xcf156000-0xcf35bfff] (2121728 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xf090-0xf097]
pci 0000:00:11.0: reg 14: [io 0xf080-0xf083]
pci 0000:00:11.0: reg 18: [io 0xf070-0xf077]
pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063]
pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f]
pci 0000:00:11.0: reg 24: [mem 0xfe60b000-0xfe60b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfe60a000-0xfe60afff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfe609000-0xfe6090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfe608000-0xfe608fff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfe607000-0xfe6070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io 0xf040-0xf047]
pci 0000:00:14.1: reg 14: [io 0xf030-0xf033]
pci 0000:00:14.1: reg 18: [io 0xf020-0xf027]
pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013]
pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfe600000-0xfe603fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfe606000-0xfe606fff]
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xfe605000-0xfe605fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xfe604000-0xfe6040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:1183] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:02:00.0: reg 10: [mem 0xfe500000-0xfe507fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:03:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:03:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:03:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:03:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:03:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:03:00.0: reg 24: [mem 0xfe410000-0xfe4101ff]
pci 0000:03:00.0: reg 30: [mem 0xfe400000-0xfe40ffff pref]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:04:00.0: [1095:3132] type 00 class 0x010400
pci 0000:04:00.0: reg 10: [mem 0xfe384000-0xfe38407f 64bit]
pci 0000:04:00.0: reg 18: [mem 0xfe380000-0xfe383fff 64bit]
pci 0000:04:00.0: reg 20: [io 0xc000-0xc07f]
pci 0000:04:00.0: reg 30: [mem 0xfe300000-0xfe37ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0d.0: PCI bridge to [bus 04]
pci 0000:00:0d.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0d.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:05:0e.0: [1106:3044] type 00 class 0x0c0010
pci 0000:05:0e.0: reg 10: [mem 0xfe200000-0xfe2007ff]
pci 0000:05:0e.0: reg 14: [io 0xb000-0xb07f]
pci 0000:05:0e.0: supports D2
pci 0000:05:0e.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:06:00.0: reg 10: [io 0xa000-0xa0ff]
pci 0000:06:00.0: reg 18: [mem 0xda104000-0xda104fff 64bit pref]
pci 0000:06:00.0: reg 20: [mem 0xda100000-0xda103fff 64bit pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
pci 0000:00:15.0: bridge window [mem 0xda100000-0xda1fffff 64bit pref]
pci 0000:07:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:07:00.0: reg 10: [mem 0xfe100000-0xfe107fff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 07]
pci 0000:00:15.1: bridge window [mem 0xfe100000-0xfe1fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0D._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
e820: reserve RAM buffer [mem 0xce47a000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf156000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
e820: reserve RAM buffer [mem 0x82f000000-0x82fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0220-0x0227] has been reserved
system 00:02: [io 0x0228-0x0237] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfeb20000-0xfeb23fff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:0d.0: PCI bridge to [bus 04]
pci 0000:00:0d.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0d.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:14.4: PCI bridge to [bus 05]
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
pci 0000:00:15.0: bridge window [mem 0xda100000-0xda1fffff 64bit pref]
pci 0000:00:15.1: PCI bridge to [bus 07]
pci 0000:00:15.1: bridge window [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x03af]
pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:05: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:05: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 10 [mem 0xd0000000-0xffffffff]
pci_bus 0000:06: resource 0 [io 0xa000-0xafff]
pci_bus 0000:06: resource 2 [mem 0xda100000-0xda1fffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xfe100000-0xfe1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30344k freed
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Interrupt remapping enabled
pci 0000:00:00.2: irq 72 for MSI/MSI-X
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xca47a000-0xce47a000] (64MB) mapped at [ffff8800ca47a000-ffff8800ce479fff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1199145981.024:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 32768
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe609000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-29-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe607000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-29-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe604000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-29-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe60a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-29-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe608000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-29-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe606000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-29-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe605000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-29-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.8.0-29-generic xhci_hcd
usb usb8: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.8.0-29-generic xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:07:00.0: irq 74 for MSI/MSI-X
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.8.0-29-generic xhci_hcd
usb usb10: SerialNumber: 0000:07:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 11
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 3.8.0-29-generic xhci_hcd
usb usb11: SerialNumber: 0000:07:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
X.509: Cert d8bc1516bb9827ccf9ced525fc4133574da45d40 is not yet valid
MODSIGN: Problem loading in-kernel X.509 certificate (-129)
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:06: setting system clock to 2008-01-01 00:06:22 UTC (1199145982)
powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 996k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1168k freed
Freeing unused kernel memory: 1076k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
udevd[134]: starting version 175
Disabling lock debugging due to kernel taint
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
scsi0 : ahci
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b280 irq 19
ahci 0000:03:00.0: irq 75 for MSI/MSI-X
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
sata_sil24 0000:04:00.0: version 1.1
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
scsi4 : ahci
scsi7 : ahci
ata5: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410100 irq 75
ata6: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410180 irq 75
scsi5 : sata_sil24
scsi8 : sata_sil24
ata7: SATA max UDMA/100 host m128@0xfe384000 port 0xfe380000 irq 40
ata8: SATA max UDMA/100 host m128@0xfe384000 port 0xfe382000 irq 40
scsi6 : pata_atiixp
scsi9 : pata_atiixp
ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: irq 76 for MSI/MSI-X
r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000305a000, 94:de:80:73:80:d5, XID 0c900800 IRQ 76
r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
firewire_ohci 0000:05:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ata9.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133
ata9.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata9.00: limited to UDMA/33 due to 40-wire cable
ata9.00: configured for UDMA/33
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: INTEL SSDSC2CT120A3, 300i, max UDMA/133
ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2CT12 300i PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
usb 4-3: new low-speed USB device number 2 using ohci_hcd
firewire_core 0000:05:0e.0: created device fw0: GUID 0049e550b59f0b00, S400
ata3.00: ATA-9: ST1000LM014-1EJ164, SM11, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
tsc: Refined TSC clocksource calibration: 4018.343 MHz
Switching to clocksource tsc
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM11 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
usb 4-3: New USB device found, idVendor=046d, idProduct=c069
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: USB Laser Mouse
usb 4-3: Manufacturer: Logitech
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input3
hid-generic 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.0-3/input0
usb 4-4: new full-speed USB device number 3 using ohci_hcd
usb 4-4: New USB device found, idVendor=2516, idProduct=0014
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: Quickfire TKL Nkeys
usb 4-4: Manufacturer: CM Storm
input: CM Storm Quickfire TKL Nkeys as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input4
hid-generic 0003:2516:0014.0002: input,hidraw1: USB HID v1.10 Keyboard [CM Storm Quickfire TKL Nkeys] on usb-0000:00:12.0-4/input0
input: CM Storm Quickfire TKL Nkeys as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/input/input5
hid-generic 0003:2516:0014.0003: input,hidraw2: USB HID v1.10 Keyboard [CM Storm Quickfire TKL Nkeys] on usb-0000:00:12.0-4/input1
usb 10-2: new high-speed USB device number 2 using xhci_hcd
usb 10-2: New USB device found, idVendor=1058, idProduct=0705
usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 10-2: Product: External HDD
usb 10-2: Manufacturer: Western Digital
usb 10-2: SerialNumber: 57442D575845363038454137363439
input: Western Digital External HDD as /devices/pci0000:00/0000:00:15.1/0000:07:00.0/usb10/10-2/10-2:1.1/input/input6
hid-generic 0003:1058:0705.0004: input,hidraw3: USB HID v1.10 Device [Western Digital External HDD ] on usb-0000:07:00.0-2/input1
Initializing USB Mass Storage driver...
scsi10 : usb-storage 10-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata7.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
ata7.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/100
scsi 5:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
sd 5:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 5:0:0:0: [sdc] Attached SCSI disk
scsi 10:0:0:0: Direct-Access WD 3200BMV External 1.75 PQ: 0 ANSI: 4
sd 10:0:0:0: Attached scsi generic sg3 type 0
sd 10:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 10:0:0:0: [sdd] Write Protect is off
sd 10:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdd] No Caching mode page present
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sd 10:0:0:0: [sdd] No Caching mode page present
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 10:0:0:0: [sdd] No Caching mode page present
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sd 10:0:0:0: [sdd] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 0)
scsi 6:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 6:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 6:0:0:0: [sde] 4096-byte physical blocks
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 6:0:0:0: [sde] Attached SCSI disk
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1053782
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1052295
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3671691
EXT4-fs (sda1): 3 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[719]: starting version 175
lp: driver loaded but no devices found
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
wmi: Mapper loaded
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (844) terminated with status 1
type=1400 audit(1199145992.816:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=895 comm="apparmor_parser"
type=1400 audit(1199145992.816:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=895 comm="apparmor_parser"
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc9000305eb00). heartbeat=60 sec (nowayout=0)
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
MCE: In-kernel MCE decoding enabled.
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
EDAC MC: Ver: 3.0.0
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
microcode: CPU0: patch_level=0x06000803
microcode: CPU1: patch_level=0x06000803
microcode: CPU2: patch_level=0x06000803
microcode: CPU3: patch_level=0x06000803
microcode: CPU4: patch_level=0x06000803
microcode: CPU5: patch_level=0x06000803
microcode: CPU6: patch_level=0x06000803
microcode: CPU7: patch_level=0x06000803
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
nvidia: module license 'NVIDIA' taints kernel.
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
type=1400 audit(1199145992.856:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=960 comm="apparmor_parser"
type=1400 audit(1199145992.856:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=960 comm="apparmor_parser"
type=1400 audit(1199145992.856:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=960 comm="apparmor_parser"
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.30 Wed Mar 27 16:56:45 PDT 2013
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
device-mapper: multipath: version 1.5.1 loaded
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
init: failsafe main process (1159) killed by TERM signal
type=1400 audit(1199145993.036:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1254 comm="apparmor_parser"
type=1400 audit(1199145993.036:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1254 comm="apparmor_parser"
type=1400 audit(1199145993.036:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1254 comm="apparmor_parser"
type=1400 audit(1199145993.036:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1259 comm="apparmor_parser"
type=1400 audit(1199145993.036:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1260 comm="apparmor_parser"
Request for unknown module key 'Magrathea: Glacier signing key: d8bc1516bb9827ccf9ced525fc4133574da45d40' err -11
r8169 0000:06:00.0 eth0: link down
r8169 0000:06:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Bridge firewalling registered
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
Ebtables v2.0 registered
init: udev-fallback-graphics main process (1728) terminated with status 1
ip6_tables: (C) 2000-2006 Netfilter Core Team
cgroup: libvirtd (1539) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root.
cgroup: libvirtd (1539) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: libvirtd (1539) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
bio: create slab at 1
Adding 33511420k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:33511420k SS
init: plymouth-stop pre-start process (2133) terminated with status 1
r8169 0000:06:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: anacron main process (4607) killed by TERM signal
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 6:0:0:0: [sde] Synchronizing SCSI cache
sd 6:0:0:0: [sde] Stopping disk
sd 5:0:0:0: [sdc] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
sd 5:0:0:0: [sdc] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
serial 00:04: disabled
i8042 kbd 00:03: System wakeup enabled by ACPI
PM: suspend of devices complete after 410.435 msecs
PM: late suspend of devices complete after 0.222 msecs
pcieport 0000:00:15.1: System wakeup enabled by ACPI
r8169 0000:06:00.0: System wakeup enabled by ACPI
pcieport 0000:00:09.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 92.773 msecs
ACPI: Preparing to enter system sleep state S3
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 19
Broke affinity for irq 75
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 18
Broke affinity for irq 73
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
Broke affinity for irq 17
Broke affinity for irq 40
smpboot: CPU 7 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x11
LVT offset 0 assigned for vector 0x400
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x12
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x13
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x14
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x15
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x16
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x17
CPU7 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
pcieport 0000:00:09.0: System wakeup disabled by ACPI
pcieport 0000:00:15.1: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 175.696 msecs
PM: early resume of devices complete after 0.128 msecs
usb usb8: root hub lost power or was reset
usb usb9: root hub lost power or was reset
r8169 0000:06:00.0: System wakeup disabled by ACPI
usb usb10: root hub lost power or was reset
usb usb11: root hub lost power or was reset
i8042 kbd 00:03: System wakeup disabled by ACPI
xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 74 for MSI/MSI-X
serial 00:04: activated
Extended CMOS year: 2000
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 10-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:07:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8807fb74d480
xhci_hcd 0000:07:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8807fb74d4c0
xhci_hcd 0000:07:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8807fbf15700
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
firewire_core 0000:05:0e.0: rediscovered device fw0
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sdb] Starting disk
ata8: SATA link down (SStatus 0 SControl 0)
ata9: link is slow to respond, please be patient (ready=0)
ata9.00: ACPI cmd ef/03:08:00:00:00:a0 (SET FEATURES) filtered out
ata9.00: ACPI cmd ef/03:20:00:00:00:a0 (SET FEATURES) filtered out
ata9.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata9.00: configured for UDMA/33
sd 6:0:0:0: [sde] Starting disk
ata7: softreset failed (timeout)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata7.00: configured for UDMA/100
sd 5:0:0:0: [sdc] Starting disk
PM: resume of devices complete after 12318.152 msecs
Restarting tasks ... done.
r8169 0000:06:00.0 eth0: link down
r8169 0000:06:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:06:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: anacron main process (5197) killed by TERM signal
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 6:0:0:0: [sde] Synchronizing SCSI cache
sd 5:0:0:0: [sdc] Synchronizing SCSI cache
sd 6:0:0:0: [sde] Stopping disk
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
sd 5:0:0:0: [sdc] Stopping disk
serial 00:04: disabled
i8042 kbd 00:03: System wakeup enabled by ACPI
PM: suspend of devices complete after 410.611 msecs
PM: late suspend of devices complete after 0.219 msecs
pcieport 0000:00:15.1: System wakeup enabled by ACPI
r8169 0000:06:00.0: System wakeup enabled by ACPI
pcieport 0000:00:09.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 92.604 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 19
Broke affinity for irq 75
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 18
Broke affinity for irq 73
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
Broke affinity for irq 17
Broke affinity for irq 40
smpboot: CPU 7 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x11
LVT offset 0 assigned for vector 0x400
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x12
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x13
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x14
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x15
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x16
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x17
CPU7 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
pcieport 0000:00:09.0: System wakeup disabled by ACPI
pcieport 0000:00:15.1: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 175.846 msecs
PM: early resume of devices complete after 0.126 msecs
usb usb8: root hub lost power or was reset
usb usb9: root hub lost power or was reset
r8169 0000:06:00.0: System wakeup disabled by ACPI
usb usb10: root hub lost power or was reset
usb usb11: root hub lost power or was reset
i8042 kbd 00:03: System wakeup disabled by ACPI
xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 74 for MSI/MSI-X
serial 00:04: activated
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
usb 10-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:07:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8807fb74d480
xhci_hcd 0000:07:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8807fb74d4c0
xhci_hcd 0000:07:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8807fbf15700
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
firewire_core 0000:05:0e.0: rediscovered device fw0
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sdb] Starting disk
ata8: SATA link down (SStatus 0 SControl 0)
ata9: link is slow to respond, please be patient (ready=0)
ata9.00: ACPI cmd ef/03:08:00:00:00:a0 (SET FEATURES) filtered out
ata9.00: ACPI cmd ef/03:20:00:00:00:a0 (SET FEATURES) filtered out
ata9.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata9.00: configured for UDMA/33
sd 6:0:0:0: [sde] Starting disk
ata7: softreset failed (timeout)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata7.00: configured for UDMA/100
sd 5:0:0:0: [sdc] Starting disk
PM: resume of devices complete after 12320.603 msecs
Restarting tasks ... done.
r8169 0000:06:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:06:00.0 eth0: link down
r8169 0000:06:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready